poltblast.blogg.se - Free squirrel picnic table plans

FREE SQUIRREL PICNIC TABLE PLANS DOWNLOAD
FREE SQUIRREL PICNIC TABLE PLANS FREE

Glue dispenser: If you want to make gluing a lot easier I recommend #ad with #ad. Sand Paper: For when your in too much of a rush to mask (hand to face) I like it so far because of how easy it is to get off. It doesn’t adhere quite as well but it is one of only a few 12 inch wide rolls I could find.

Making tape: I would highly recommend #ad I also use #ad as well. Wood: The wood for this project came from Ocooch Hardwoods though I often use #ad as well. The material thicknesses included to date are: This will take approximately half a sheet of laser material. The shelf is about 6 inches wide 6 inches long and about 3.5 inches tall.

FREE SQUIRREL PICNIC TABLE PLANS FREE

FREE SQUIRREL PICNIC TABLE PLANS DOWNLOAD

There are instructions included in the download and it is really simple to put together. Since there is no way to return a digital download, there are no refunds either. You will not receive this as a Squirrel Picnic Table in the mail. The video below summarizes the steps to build the squirrel picnic table.PLEASE READ CAREFULLY! This is a Squirrel Picnic Table Digital Download only! Geared for people with CNC, plasma cutters, laser cutters, etc. From start to finish the project should only take an hour or so.

Attach a container to hold the squirrel food: In the picnic table I made I attached a pasta sauce lid with a screw which will hold bird seed and nuts to feed the squirrels.Īnd that’s it! It seems like a lot of steps, but the steps are short.

If you go online you will see that there are multiple ways to connect the bench to the fence (other than the method I used).

Attach a board to connect the picnic to the fence: I added a board which would connect the table base to the fence, going perpendicular from the table base.

Next screw the benches to the table base.

Create the benches and attach the benches to the table base: For this step you need to cut the two pieces which will serve as the benches.

You could instead use screws but since the legs attach to the table top at an angle there is a decent chance the wood will split so I wouldn’t recommend it.

Attached the table top to the legs: To attach the table top to the legs I used wood glue and clamped it in place overnight.

Create the table top: For this step you just need to cut a board to be the size you want your table top.

Make sure to drill a pilot hole as the legs are thin and they could split if too much force is applied.

Attach the table base to the table legs: This step is pretty simple, just screw the table legs into the table base.

You just need to cut the boards long enough to support both benches and have the boards be wide enough to attach to the legs.

In the photo from Amazon the base is two boards while in the table I built it is one board. Create the table base: The table base is the board (or boards) which will support the benches and will attach to the legs.I used a Mitre saw for all of this, you could use a circular saw but it would make it more difficult to make the cuts exact. Make sure the legs are all cut at the same length and the same angle. Create the table legs: This is really simple, just cut four legs at an angle.Here are the steps to make the squirrel picnic table. This is the end result, I am pretty happy with how it turned out. The construction of the table seemed fairly simple so I decided to try to make my own. This is a squirrel picnic table I found on Amazon (Selling for $40!) If you look on Amazon you will see dozens of squirrel picnic table options, most for $25 or more. A craze which was been circulating is the concept of the squirrel picnic table.